Sold Out

REDARC IN VEHICLE MULTI STAGE BATTERY CHARGER AND DUAL BATTERY ISOLATOR COMBINATION LATEST 2016 MODEL BCDC1240 WITH MPPT SOLAR INPUT , BRAND NEW IN BOX WITH FULL NATIONWIDE 2 YEAR WARRANTY + FULL INSTALLATION KIT WITH CHANGEOVER 80A REPLY KIT ( NOT CIRCUIT BREAKERS OR FUSES )+6B&S CABLE + DUAL VOLTAGE DISPLAY

                                                  You can install this kit to charge from 24V to 12V system. 

 

PACKAGE INCLUDES:

·        1 x Genuine Redarc BCDC1240 with installation instructions

·        CHANGEOVER 80A RELAY KIT

  • 1 x Double Digital Volt Gauge (Red & Green color）
  • 4 x Mounting Screws
  • 4 x Blue Spade Terminals
  • 2 METER 6B&S NEG CABLE (black）
  • 6 METER 6B&S POSITIVE CABLE（red）

CHANGEOVER 80A RELAY KIT Includes:

  • 1 X 80 AMP 12V CHANGOVER RELAY
  • 1 X RELAY HOLDER WITH CABLES 
  • 3 X 6MM JOINERS TERMINALS
  • 2 X 4MM JOINERS TERMINALS
  • 3X 6MM SHRINK WRAP
  • 2 X 4MM SHRINK WRAP

CABLE SPECIFICATIONS

  • 14mm² nominal area stranding 168/0.32 6 gauge 135 amprated @ 30 degrees C
  • 6B&S  Twin Core with outer Jacket

Red/Green illuminated display features:

  • Great for your Dual Battery setup
  • Can move the gauges into a vertical position or horizontal position
  • Range - 0 - 30 Volt
  • Flush mountable for easy installation

REDARC’s In-vehicle battery charger features technology designed to fully charge your batteries, regardless of their type or size.  By providing a unique charging profile to each specific battery type, the REDARC In-Vehicle Battery Charger is able to achieve and maintain an optimal charge in your secondary battery. 
The In-Vehicle Battery Charger also features a Maximum Power Point Tracking (MPPT) solar regulator, allowing you to deliver the maximum amount of power from your solar panels to your auxiliary battery.

This is about as good as gets  for  a dual battery system solution, with many four wheel drivers and people  towing a  vehicle set up with 2 different battery technologies ( start  battery being lead  acid ) and the auxiliary battery being another , say AGM  , it is difficult to  get long life or full charge out of the  second/auxiliary battery.
THIS IS THE SOLUTION , the BCDC1240 is a battery isolator and a 3 stage   battery charger in one Isolating the start battery with the ignition off and  a BOOST, FLOAT and ABSORPTION charger  This unit will also compensate for  low  voltage wiring to it and the auxiliary battery DOES NOT RELY on the  alternator  to receive it's charge rate which in a lot of cases is not the  optimum anyway, So if you need more battery capacity from your system  consider this as an  alternative you may have enough , just the Auxiliary  battery may not be getting  it's full charge. This unit also features MPPT (maximum power point tracking) solar regulator for connecting in with a solar panel system as well.

　

　

　

Features:

  • Multi stage charging styles (selectable) for best charging of different battery types
  • Will operate in up to 80 degree C   temperatures ( ideal for  under bonnet mounting) + over temp protection
  • Input voltage over and under shutdown
    Reverse connection(polarity protection )
  • Short circuit protection
  • Over current Protection
  • Led indicator for charging status and battery type selected
  • Sealed case suitable for marine and mining applications where dust is a problem
  • Selectable solar regulator mode　

 

SPECIFICATIONS

  • MODEL BCDC1240
    DIMENSIONS = 120mm long x 150mm wide x 37mm high
    WEIGHT = 680 grams 
    INPUT VOLTAGE RANGE = 9 - 32 volts (this means suitable for 12 and 24 volt systems)
    CHARGING SPECS = GEL /AGM BATTERIES 14.5v (max) 13.3v (float)
                                 = STANDARD LEAD ACID BATTERIES = 14.9v (max) 13.3v (float)
                                         = CALCIUM TYPE BATTERIES= 15.3v (max) 13.3v (float)
    OUTPUT POWER    = 40 amps (max) 600w (max)